Brother HL-S7000DN User Manual download pdf (Page 22)

IPsec Settings

Note

The number of characters you can set differs depending on the setting you chose in Hash in Encapsulating

Security.

If the length of the specified authentication key is different from the selected hash algorithm, an error will

occur.

• MD5: 128 bits (16 bytes)

• SHA1: 160 bits (20 bytes)

• SHA256: 256 bits (32 bytes)

• SHA512: 512 bits (64 bytes)

When you specify the key in ASCII Code, enclose the characters in double quotation marks.

 Code key (ESP)

Specify the key to use for encryption. Enter the In/Out values.

These settings are necessary when Custom is selected in Use Prefixed Template, Manual is

selected in IKE, and ESP is selected in Protocol in Encapsulating Security.

Note

The number of characters you can set differs depending on the setting you chose in Encryption in

Encapsulating Security.

If the length of the specified code key is different from the selected encryption algorithm, an error will occur.

• DES: 64 bits (8 bytes)

• 3DES: 192 bits (24 bytes)

• AES-CBC 128: 128 bits (16 bytes)

• AES-CBC 256: 256 bits (32 bytes)

When you specify the key in ASCII Code, enclose the characters in double quotation marks.

 SPI

These parameters are used to identify the security information. Generally, a host has multiple SAs

(Security Associations) for several types of IPsec communication. Therefore, it is necessary to identify

the applicable SA when an IPsec packet is received. The SPI parameter, which identifies the SA, is

included in the AH (Authentication Header) and ESP (Encapsulating Security Payload) header.

These settings are necessary when Custom is selected in Use Prefixed Template, and Manual is

selected in IKE.

Enter the In/Out values. (3-10 characters)

 Submit

Click this button to register the settings.

Note

When you change the settings of the currently used template, the IPsec setting screen for Web Based

Management will close and open again.

1 2 ... 17 18 19 20 21 22 23 24 25 26

No comments

Brother HL-S7000DN User Manual Page 22