Brother MFC-J2510 User's Guide download pdf (Page 29)

Configuring your machine for a wireless network

Configuring your machine when the SSID is not broadcast 3

(For MFC-J2510/J4510DW/J4710DW) 3

a Before configuring your machine we recommend you write down your wireless network settings. You will

need this information before you continue with the configuration.

Check and record the current wireless network settings.

TKIP is supported for WPA-PSK only.

NOTE

If your access point/router uses WEP encryption, enter the key used as the first WEP key. Your Brother

machine supports the use of the first WEP key only.

b Press .

c Press All Settings.

d Press Network.

e Press WLAN.

f Press Setup Wizard.

g When Switch Network interface to wireless? is displayed, press Yes to accept.

This will start the wireless setup wizard.

To cancel, press No.

SSID (Network Name):

Communication Mode Authentication method Encryption mode Network key

Infrastructure Open system WEP

NONE —

Shared key WEP

WPA/WPA2-PSK AES

TKIP

For example:

SSID (Network Name):

HELLO

Communication Mode Authentication method Encryption mode Network key

Infrastructure WPA2-PSK AES 12345678

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 109 110

No comments

Brother MFC-J2510 User's Guide Page 29