Brother MFC-J2510 User's Guide download pdf (Page 31)

Configuring your machine for a wireless network

(For DCP-J4110DW, MFC-J2310/J4310DW/J4410DW/J4610DW) 3

a Before configuring your machine we recommend you write down your wireless network settings. You will

need this information before you continue with the configuration.

Check and record the current wireless network settings.

TKIP is supported for WPA-PSK only.

NOTE

If your access point/router uses WEP encryption, enter the key used as the first WEP key. Your Brother

machine supports the use of the first WEP key only.

b Press Settings.

c Press s or t to display Network and then press Network.

d Press WLAN.

e Press Setup Wizard.

f When Network I/F switched to Wireless is displayed, press Yes to accept.

This will start the wireless setup wizard.

To cancel, press No.

g The machine will search for your network and display a list of available SSIDs. Press s or t to display

<New SSID>, and press <New SSID>.

h Enter the SSID name. (For information on how to enter text, see the Quick Setup Guide.)

Press OK.

SSID (Network Name):

Communication Mode Authentication method Encryption mode Network key

Infrastructure Open system WEP

NONE —

Shared key WEP

WPA/WPA2-PSK AES

TKIP

For example:

SSID (Network Name):

HELLO

Communication Mode Authentication method Encryption mode Network key

Infrastructure WPA2-PSK AES 12345678

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 109 110

No comments

Brother MFC-J2510 User's Guide Page 31