Brother MFC-J2510 User's Guide download pdf (Page 69)

Internet fax (For MFC models) (Available as a download)

How to receive an Internet fax 7

There are 2 ways you can receive E-mail messages:

 POP3 receiving at regular intervals

 POP3 receiving (manually initiated)

When using POP3, the receiving machine must poll the E-mail server to receive the data. This polling can

occur at set intervals (for example, you can configure the machine to poll the E-mail server at 10 minute

intervals) or you can manually poll the server by pressing , All Settings, Network,

E-mail/IFAX (Email/IFax), and then Manual POP3 Receive.

If your machine starts to receive E-mail data, the LCD panel will reflect this activity. For example, you will see

Receiving on the LCD panel followed by xx/xx E-mail(s). If you press , All Settings, Network,

E-mail/IFAX (Email/IFax), and then Manual POP3 Receive to manually poll the E-mail server for

E-mail data and there are no mail documents waiting to be printed, the machine will display No Mail on the

LCD panel for two seconds.

NOTE

• If your machine is out of paper when receiving data, the received data will be held in the machine’s

memory. This data will be printed automatically after paper is re-inserted into the machine.

• When the Temporary Fax Backup Function on the control panel is turned on, received data will be stored

for a certain period of time. For more details, see the Advanced User’s Guide.

• If the received mail is not in a plain text format or an attached file is not in the TIFF-F format, the following

error message will be printed: “ATTACHED FILE FORMAT NOT SUPPORTED”. If the received mail is

too large, the following error message will be printed: “E-MAIL FILE TOO LARGE”. If

Delete POP Receive Error Mail is ON (default) then the error mail is automatically deleted from the

E-mail server.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 109 110

No comments

Brother MFC-J2510 User's Guide Page 69