Brother DA-9280 Instruction Manual download pdf (Page 17)

5. INSTALLATION

DA-9280

6. Remove the rubber cap (10).

7. Turn the machine pulley until the needle bar (11) is raised to

the highest position.

8. Add 2-3 drops oil to the needle bar from the hole from which

the rubber cap (10) was removed.

9. Insert the rubber cap (10).

10. Add 1-2 drops of oil to the needle bar bush lubrication hole

(12).

* Add 1-2 drops of oil to the needle bar bush lubrication hole

(12) once a week.

5-7. Checking the machine pulley rotating direction

CAUTION

Do not touch any of the moving parts or place any objects against the machine while sewing machine is operating, as this

may result in personal injury or damage to the machine.

1. Insert the power cord plug into the wall outlet, and then turn

on the power switch.

2. Depress the treadle slightly and check that the machine

pulley (1) starts to turn in the direction of the arrow [A].

If the direction of rotation is reversed, change the

direction of rotation to the correct direction while referring

to the instruction manual for the motor.

* For the first 3 - 4 days of use, run the machine at 500

rpm lower than the usual speed. This will help contribute

to a longer service life for the machine.

1483B

1482B

1 ... 16 17 18 ... 36

No comments

Brother DA-9280 Instruction Manual Page 17