Brother DA-9280 Instruction Manual download pdf (Page 32)

11. INSTALLING OPTIONAL PARTS

DA-9280

11. INSTALLING OPTIONAL PARTS

CAUTION

Installation of optional parts should only be carried out by a qualified technician.

Turn off the power switch and disconnect the power cord from the wall outlet before installing optional parts.

The motor will keep turning even after the power is switched off as a result of the motor’s inertia. Wait until the motor stops

fully before starting work.

The machine may operate if the treadle is depressed by mistake, which could result in injury.

The parts shown in the illustration below are necessary when installing the needle thread cooler.

Needle thread cooler

NAME OF PARTS Q’TY CODE

(1) Thread cooler tank assembly 1 S58045㧙001

(2) Taptite, Cup B M312 2 087311㧙216

(3) Felt 1 S08761㧙100

(4) Thread guide 1 S58047㧙001

(5) Screw, Pan SM 4.37-407 2 062680㧙712

(6) Silicone oil 1 S06704㧙001

1. Install the thread cooler tank assembly (1) to the thread

guide (4) with the two screws (2).

2. Insert the felt (3) into the thread cooler tank assembly (1).

3. Install the thread cooler tank assembly (1) to the part [A] of

the arm with the two screws (5).

1537B

1538B

1 ... 31 32 33 34 35 36

No comments

Brother DA-9280 Instruction Manual Page 32