Brother MFC9870 Owner's Manual Page 109

  • Download
  • Add to my manuals
  • Print
  • Page
    / 170
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 108
101
USING THE MACHINE AS A PRINTER
Two-Sided Printing (Manual Duplexing)
The supplied printer driver for Windows
®
95, 98 and for Windows NT
®
Workstation Version 4.0 enables manual duplex printing. (For more
information, see the Help screen for the printer driver.)
If you are using Parallel Cable, please select LPT1 on the printer driver.
The machine prints all the even-numbered pages on one side of the paper
first. Then, the Windows
®
driver instructs you (with a pop-up message)
to reinsert the paper. Before reinserting the paper, straighten it well, or
you may get a paper jam. Very thin or very thick paper is not
recommended.
Manual Feed Slot
Your machine has a manual feed slot above the paper cassette. You can
load envelopes and special print media one at a time into this slot. You
do not have to remove paper from the paper cassette. (For information
about acceptable paper see, “Printting on Envelops Thicker Paper and
Card Stock” in this chapter.) Insert the sheet of paper with the side you
wish to print on face up in the manual feed slot.
Use the manual feed slot to print or copy on labels, envelopes, card stock
or thicker paper.
If you use labels and envelopes, they must be of a type suitable for use
with a laser printer. If you use incorrect types it is possible to damage or
contaminate the drum surface and cause printing problems.
See
“Printing on
Envelops,
Thicker
Paper and
Card Stock”
in this
chapter
Page view 108
1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 169 170

Comments to this Manuals

No comments