Brother 580MC User Manual download pdf (Page 48)

6 - 2

SETUP SEND

Manual Transmission

Manual transmission lets you hear the dial tone, ringing and fax receiving tones before

sending the fax.

Place the original face down in the ADF.

Pick up the handset and listen for a dial tone

—OR—press Speaker Phone and listen for a dial tone.

Enter the fax number you want to call. (You can enter the digits using the dial pad, or

you can enter a One Touch or Speed Dial number or you can call using

Search/Speed Dial.) (See One Touch Dialing, page 7-4 and Search, page 7-6.)

When you hear the fax tone, press Start.

If you’re using the handset, hang up.

Automatic Transmission

This is the easiest way to send a fax.

IMPORTANT: Do not pick up the handset, or press Speaker Phone.

Place the original face down in the ADF.

Enter the fax number using One Touch, Speed Dial, Search or the dial pad. (See One

Touch Dialing, Speed Dialing and Search, page 7-4 to 7-6.)

Press Start.

Manual and Automatic Fax Redial

If you’re sending a fax manually and the line is busy, press Redial/Pause to retry the

number.

If you’re sending a fax automatically and the line is busy, the FAX/MFC will redial

automatically up to three times at 5 minute intervals.

Memory Transmission

This feature allows your machine to scan a fax into its memory and send it as soon as

the scan is complete. This way, you don’t have to wait for the entire fax to be

transmitted before you retrieve your original.

Place the original face down in the ADF.

Press Function/Set, 3, 9.

To change the default setting, press or

to select ON (or OFF) and press

Function/Set. Go to Step 5—OR—For the

next fax transmission only, press or to

select NEXT FAX ONLY and press Function/Set.

For the next fax only, press or to select ON (or OFF) and

press Function/Set.

9.MEMORY TX

SELECT <- -> & SET

MEMORY TX:ON?

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 114 115

No comments

Brother 580MC User Manual Page 48