Brother P-Touch 3600 User's Guide download pdf (Page 46)

34

Ch. 2 Getting Started

Getting Started

Ironing

Iron garments with transfers using normal tem-

perature settings.

Be sure to place a piece of cloth between the

iron and the label when you iron over it to pre-

vent the label from sticking to the iron.

The labels are non-toxic, however, please main-

tain the usual precautions, such as not placing

them in your mouth, etc.

Fabric tape

Fabric tape is used to attach a piece of fabric

printed with your text onto garments using an

iron. After printing the text onto fabric tape and

cutting off the label using scissors

, place the

label on an ironed garment at the location

where you wish to attach it in such a way that

the printed text can be read correctly. Cover the

label with another piece of cloth and use an

iron set to a medium-high temperature (320 to

356 °F (160 to 180 °C)) to press down firmly for

15 to 30 seconds. For more details, refer to the

instructions included with the fabric tape cas-

sette.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Assembling stamps

In addition to labels, your P-touch can be used

to make custom, pre-inked stamps for various

uses (optional stamp kit required). Simply design

your own customized stamps using one of the

pre-formatted stamp templates, and then affix

the printed stamp stencil to a self-inking stamp

film holder.

1 Install a stamp film cassette, and then for-

mat the stamp text in either of the following

ways:

a) Select a pre-formatted stamp template

from those available with the Auto For-

mat function (refer to page 59).

b) Type in text, and then set the Stamp func-

tion to ON (refer to page 59).

3 Print out the stamp stencil and remove its

backing paper.

4 Remove the frame from around the stamp

holder ink pad, one end at a time, and then

remove the protective seal covering the ink

pad.

5 With the glossy side of the stamp film facing

up, align one end of the stamp film with the

slit in the side of the stamp holder.

P-TOUCH

NOTE

If an Auto Format stamp template is used, it is not

necessary to set the Stamp function to ON.

NOTE

☞

If the stamp holder already contains a stamp

film, hold the stamp over a piece of scrap paper

and remove the stamp frame by pulling it off,

one end at a time. Then, slowly peel off the

stamp film. Be careful that the ink does not

splatter.

☞

Keep the stamp film holder out of the reach of

children.

☞

Avoid getting ink in your eyes or mouth. If ink

gets in your eyes or mouth, immediately wash it

with fresh water for several minutes and consult

a doctor.

☞

Keep ink off skin, clothes and important papers.

Immediately use soap to wash skin that has

come in contact with ink. Even washing may

not remove all ink.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 203 204

Comments to this Manuals

No comments