Brother MFC-255CW User Manual download pdf (Page 36)

Chapter 3

22

Paper settings 3

Paper Type 3

To get the best print quality, set the machine

for the type of paper you are using.

a Press Menu, 1, 2.

b Press a or b to choose Plain Paper,

Inkjet Paper, Brother BP71,

Other Glossy or Transparency.

Press OK.

c Press Stop/Exit.

Note

The machine ejects paper with printed

surfaces face up onto the paper tray in

front of the machine. When you use

transparencies or glossy paper, remove

each sheet at once to prevent smudging

or paper jams.

Paper Size 3

You can use five sizes of paper for copies:

Letter, Legal, A4, A5 and 4

×

6in. (10

×

15 cm)

and three sizes for printing faxes: Letter, Legal

and A4. When you change the size of paper

you load in the machine, you will need to

change the paper size setting at the same time

so your machine can fit an incoming fax on the

page.

a Press Menu, 1, 3.

b Press a or b to choose Letter, Legal,

A4, A5 or 4"x6".

Press OK.

c Press Stop/Exit.

Volume Settings 3

Ring Volume 3

You can choose a range of ring volume

levels, from High to Off.

While the machine is idle, press d or c

to adjust the volume level. The LCD shows

the current setting, and each key press will

change the volume to the next level. The

machine will keep the new setting until you

change it.

You can also change the volume through the

menu, by following the instructions below:

Setting the Ring Volume from the

menu

3

a Press Menu, 1, 4, 1.

b Press a or b to choose Low, Med, High

or Off.

Press OK.

c Press Stop/Exit.

Beeper Volume 3

When the beeper is on, the machine will beep

when you press a key, make a mistake or

after you send or receive a fax.

You can choose a range of volume levels,

from High to Off.

a Press Menu, 1, 4, 2.

b Press a or b to choose Low, Med, High

or Off.

Press OK.

c Press Stop/Exit.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 179 180

Comments to this Manuals

No comments