Brother HL7050 User Manual download pdf (Page 121)

10 - 6 BANYAN VINES NETWORK CONFIGURATION

YL4US_FAX2800MFC4800-FM5.5

Print Server Configuration Using the Print Server

Console

As an alternative to BRAdmin, you may use the print server console

to configure the print server. The steps are as follows:

Connect to the print server console using TELNET, NCP,

BRCONFIG Execute some or all of the commands detailed

below (you must minimally enter the StreetTalk login name of

the print server and associate one of the print server services

with the StreetTalk name of a print queue).

SET BAnyan LOgin loginname

Sets the StreetTalk login name of print server.

SET BAnyan PAssword password

Sets the login password of print server. The password (if any) must

match the password you specified in step 3 of the File Server User

Console section.

SET SERVIce service STreettalk queuename

Enables the Banyan protocol on the specified Brother print server

service and associates this service with the StreetTalk name of a

given print queue on the VINES file server. Type SHOW SERVICE to

see a list of the available services (if in doubt, use BINARY_P1).

SET BAnyan HOp nn

Sets number of hops between the Brother print server and the

Banyan file server. The default value is 2, which is adequate for most

sites, but you will need to change this value if the file server is more

than two hops away from the print server.

When you have finished entering commands, type EXIT to exit the

remote console and cause the commands to take effect.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 163 164

No comments

Brother HL7050 User Manual Page 121