Brother HL7050 User Manual download pdf (Page 80)

NOVELL NETWARE PRINTING 6 - 14

YL4US_FAX2800MFC4800-FM5.5

Configuring the Brother Print Server

(Queue Server Mode in Bindery emulation mode)

using PCONSOLE and BRCONFIG

4.1x or later; be sure to specify the /b option for bindery mode).

Execute BRCONFIG from the Windows

menu.

Select the corresponding server name from the list of print

servers.

When you get the message that the print server is connected,

type the default password access in response to the # prompt

(the password will not echo), and then press the ENTER key in

response to the Enter Username> prompt.

When you get the Local> prompt, type:

SET NETWARE SERVER servername ENABLE

Where servername is the name of the file server on which the

print queue will reside. If there is more than one file server that

you wish to print from, repeat this command as many times as

necessary.

Type EXIT to exit the BRCONFIG remote console program and

save the changes, then start the Novell PCONSOLE utility.

If you have NetWare 4.xx, change the mode to Bindery Mode by

pressing F4 key. Select print server Information (NetWare

3.xx) or print servers (NetWare 4.1x; ignore the warning

message) from the Available Options menu.

You will be shown a list of current print servers. Press the

INSERT key to create a new entry, type in the NetWare print

server name (BRN_xxxxxx_P1 by default, where xxxxxx is the

last six digits of the Ethernet address) and press ENTER.

Return to the main Available Options menu by pressing

ESCAPE.

Select the Print Queue Information (NetWare 3.xx) or Print

Queues (NetWare 4.1x) menu option to see list of configured

print queues.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 163 164

No comments

Brother HL7050 User Manual Page 80