Brother RH-9820 Service Manual download pdf (Page 146)

6. ASSEMBLY

RH-9820

137

C Cord holder (20) installation

1) Install the cord holder (20) so that the side with

the wider hook is on the right as shown in the

illustration, and then while gently pushing it in

the direction of the arrow, tighten the two

screws (21) to secure it in place.

2) Secure the oil tube (7) behind the cord presser

(20) and the stop switch cord (a) with the cord

presser (22).

D Tapping in the oil pot window

1) Insert the oil tube (6) and the oil tube (b)

coming from the oil plate assembly (26) into the

oil tank.

2) Check that the wick (c) is attached to the base

of the oil tank, and then tap in the oil gauge

window (30).

E Inserting the wicks

1) Insert the four wicks (d) into the arm relay hole

(e).

* Insert the four wicks (d) securely into the

holes as far as they will go.

* A list of the four wicks (d) is as follows.

・Wick (1)

・Wick (10)

・Felt presser assembly (7) in “6-6. Needle

bar mechanism (2)”

・Wick (11) in “6-3. Zigzag mechanism”

2) Push in the felt (31).

1032B

1033B

1034B

Narrow

side

Wide

side

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 235 236

No comments

Brother RH-9820 Service Manual Page 146