Brother MFC7150C User Manual download pdf (Page 116)

101

MESSAGE CENTER (FOR MFC 7160C ONLY)

Remote Retrieval

This section is for the MFC 7160C. (If you have the MFC 7150C, please see

Chapter 10 for your remote fax options.) You can call your MFC from a fax

machine using touch tone and use the Remote Access Code and other button

presses to retrieve voice (and fax) messages. You can also program and

change some settings for your Message Center.

Using Remote Access Code

Dial your MFC phone number from a fax machine using touch tone.

When your MFC answers and beeps, immediately enter your Remote Access

Code.

The MFC signals the kinds of messages received:

1 long beep—Fax message(s)

2 long beeps—Voice message(s)

3 long beeps—Fax and Voice message(s)

No beeps—No messages

The MFC then prompts you with two short beeps to enter a command.

If you wait longer than 30 seconds to enter a command, the MFC hangs

up. If you enter an invalid command, the MFC beeps three times.

Press

to reset the MFC when you finish.

Hang up.

If your MFC is set to MANUAL mode, you can access the Message Center by

waiting about 2 minutes, then entering the Remote Access Code within 30

seconds.

Changing Remote Access Code

Enter your Remote Access Code when the MFC picks up your call, so you can

access features remotely. The access code is preset to 159 , but you can

change this.

Press

Function

Enter a three-digit number from 000 to 999. The “ ” cannot be

changed. Do not use the same digits that appear in your Fax Receive

Code or Telephone Answer Code.

Press

Set

Press

Stop

to exit.

See

Operation from

Extension

Telephone

pp. 47–48

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 274 275

Comments to this Manuals

No comments

Brother MFC7150C User Manual Page 116

Comments to this Manuals

Related products and manuals for Faxes Brother MFC7150C