Brother FAX-931 Owner's Manual download pdf (Page 89)

CHAPTER NINE

Changing the Fax Forwarding Number

You can change the default setting of your fax forwarding number from a

remote fax machine.

Dial your fax machine’s number.

When you hear the beep, immediately enter your Remote Access

Code (The factory setting is 1 5 9

When you hear two short beeps, use the dial pad to press 9 5 4.

Enter the new number of the remote fax machine (up to 20 digits)

where you want your fax messages forwarded, and then press # #.

You cannot use and # as dial numbers. However, if you want to store a

pause, press #. Also, if your fax machine is connected to a PABX, you

can press # first before the fax machine’s number. The # works as well as

R key.

To retrieve the Memory Status List, when you hear two short beeps,

use the dial pad to press 9 6 1.

Use the dial pad to enter the number of the remote fax machine (up

to 20 digits), and then press # #.

After you hear your fax machine beep, hang up and wait.

Your fax machine calls the remote fax machine. Your fax machine

then sends the Memory Status List showing the new forwarding

number to the fax machine that you are calling from.

Check the forwarding number.

If the forwarding number is incorrect, return to Step 1 to reset it.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 158 159

No comments

Brother FAX-931 Owner's Manual Page 89