Brother fax2800 User Manual download pdf (Page 38)

2 - 10

ASSEMBLY AND CONNECTIONS

Connections

The external TAD must be plugged into the left side of the FAX/MFC, into the

jack labeled EXT. Your FAX/MFC cannot work properly if you plug the TAD

into a wall jack (unless you are using Distinctive Ring).

Plug the telephone line cord from the wall jack into the left side of the FAX/

MFC, in the jack labeled LINE.

Plug the telephone line cord from your external TAD into the left side of the

FAX/MFC, in the jack labeled EXT. (Make sure this cord is connected to the

TAD at the TAD’s telephone line jack, and not its telephone set jack.)

Set your external TAD to four rings or less. (The FAX/MFC’s Ring Delay

setting does not apply.)

Record the outgoing message on your external TAD (see next page).

Set the TAD to answer calls.

Set the Receive Mode to TAD:ANSWER MACH. (See Choosing the Receive

Mode

, page 5-1.)

Do not connect a TAD elsewhere on the same phone line (unless you have

the Distinctive Ring service).

TAD

LINE

EXT.

NO !

YES !

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 147 148

No comments

Brother fax2800 User Manual Page 38