Brother fax2800 User Manual download pdf (Page 91)

REMOTE FAX OPTIONS

9 - 4

Remote Commands

Follow the commands below to access features remotely. When you call the

FAX/MFC and enter your Remote Retrieval Access Code (1 5 9 ), the system

will signal you with two short beeps to enter a remote command.

Remote Commands Operation Details

95 Changing Fax Forwarding

/Paging setting

1 OFF If you hear one long beep, the change is accepted. If you hear three

short beeps, you cannot change it because the conditions have not

been met (Example: registering paging number). You can register

your fax forwarding number by using 4. FAX FWD NO. (see page

9-5). Once you have registered the number, the FAX/MFC will

change automatically to FAXFWD:ON mode.

2 Fax Forwarding

3 Paging

4 FAX FWD No.

6 Fax Storage ON You can turn FAX STORAGE to ON or OFF.

7 Fax Storage OFF

96 Retrieve a fax

2 Retrieve all faxes Enter the number of a remote fax machine to receive stored fax

messages. (See page 9-5.)

3 Erase faxes from the memory If you hear one long beep, you can erase fax message(s) from the

memory.

97 Check the Receiving Status

1 FAX You can check whether your FAX/MFC has received any faxes.

If yes, you will hear one long beep. If no, you will hear three short

beeps.

98 Change the Receive Mode

1 TAD: ANSWER MACH. If you hear one long beep, you can change the Receive Mode.

If you hear three short beeps, you cannot change it.

2 FAX/TEL

3.FAX ONLY

90 Exit After a long beep, you can exit Remote Retrieval.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 147 148

No comments

Brother fax2800 User Manual Page 91