Brother MFC-9120CN User Manual Page 198
- Page / 264
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
182
When you replace a belt unit with a new
one, you need to reset the belt unit
counter by completing the following
steps:
C
a Plug the machine’s power cord back into
the AC power outlet first, and reconnect
all cables and telephone line cord. Turn
on the machine’s power switch.
b (For MFC-9320CW) Press Menu, 8, 4.
(For MFC-9120CN) Press Menu, 6, 4.
c Press a or b to select Belt Unit.
Press OK.
d Press 1 to reset the belt unit counter.
e Press Stop/Exit.
Replacing the waste toner
box C
Order No. WT-200CL
A new waste toner box can print
approximately 50,000 A4 or Letter size
single-sided pages.
WT Box End Soon message C
WT Box End Soon
If the LCD shows WT Box End Soon, it
means the waste toner box is near the end of
its life. Buy a new waste toner box and have
it ready before you get a Replace WT Box
message.
Replace WT Box message C
When the following message appears on the
LCD, you need to replace the waste toner box:
Replace WT Box
IMPORTANT
DO NOT reuse the waste toner box.
WARNING
DO NOT put the waste toner box into a fire.
It could explode.
Be careful not to spill the toner. DO NOT
inhale or allow it to get into your eyes.
a Turn off the machine’s power switch.
Unplug the telephone line cord first, and
then unplug the power cord from the AC
power outlet.
b Fully open the top cover by lifting up on
the handle (1).
IMPORTANT
When the scanner is open, you cannot
open the top cover.
1
- USER’S GUIDE 1
- Brother numbers 3
- 1 page per job 4
- (USA and Canada) 5
- LIMITED WARRANTY 8
- Table of Contents 9
- Section II Fax 10
- 6 Receiving a fax 46 11
- 10 Polling 79 12
- 11 Printing reports 81 12
- Section III Copy 13
- Section IV Direct printing 13
- Section V Software 14
- Section VI Appendixes 14
- D Menu and features 194 15
- E Specifications 218 15
- F Glossary 237 15
- GIndex 241 15
- General I 17
- General information 1 18
- Accessing the 19
- Software User’s Guide 19
- Chapter 1 20
- Accessing Brother 21
- Control panel overview 1 22
- 34 5 6 7 8 23
- Data LED indications 1 26
- Loading paper and documents 2 27
- Loading paper in the manual 29
- Chapter 2 30
- Loading paper and documents 31
- Unprintable area 2 33
- Acceptable paper and 34
- Loading documents 2 39
- General Setup 3 41
- Volume settings 3 42
- Automatic daylight 43
- Ecology features 3 43
- LCD Contrast 3 44
- Dial Prefix 3 44
- Security features 4 45
- Changing the password for 46
- Setting up the public user 46
- Setting up restricted users 4 47
- Turning Secure Function 47
- Lock on/off 4 47
- Memory Security 48
- (MFC-9120CN only) 48
- Security features 49
- Setting Lock 4 50
- Restricting dialing 4 51
- Speed Dial restriction 4 52
- Section II 53
- Sending a fax 5 54
- Broadcasting 55
- (black & white only) 55
- Additional sending 56
- Electronic cover page 57
- (black & white only) 5 57
- Contrast 5 58
- Changing Fax Resolution 5 58
- Dual access 59
- Real Time Transmission 5 59
- Overseas Mode 5 60
- Delayed Fax 60
- Delayed batch transmission 60
- Manual transmission 5 61
- Receiving a fax 6 62
- Receiving a fax 63
- Using receive modes 6 64
- Receive Mode settings 6 65
- Easy Receive 6 66
- Setting the Print Density 6 66
- Additional receiving 67
- Printing a fax from the 68
- Receiving faxes into memory 68
- (black & white only) 6 68
- Telephone line 69
- Distinctive Ring 7 70
- Very important! 71
- Caller ID 7 72
- Connecting an external 73
- TAD (telephone 73
- Connections 7 74
- Recording an outgoing 74
- Special line considerations 7 75
- External and extension 76
- Fax Receive Code 7 77
- Telephone Answer Code 7 77
- Changing the Remote Codes 7 78
- Dialing and storing numbers 8 79
- Storing numbers 8 80
- Storing One Touch Dial 81
- Storing Speed Dial numbers 8 82
- Dialing and storing numbers 83
- Changing One Touch and 84
- Speed Dial numbers 8 84
- Setting up Groups for 85
- Broadcasting 8 85
- Chapter 8 86
- Dialing access codes and 87
- Tone or Pulse (Canada only) 8 87
- Remote Fax Options 88
- Paging 9 89
- Fax Storage 9 89
- PC Fax Receive 9 90
- Changing Remote Fax 91
- Remote retrieval 9 92
- Retrieving fax messages 9 93
- Changing the Fax Forwarding 93
- Remote fax commands 9 94
- Polling 10 95
- Polled transmit 96
- Printing reports 11 97
- Reports 11 98
- How to print a report 11 99
- Chapter 11 100
- Copy III 101
- Making copies 12 102
- Copy options 103
- (temporary settings) 103
- Using the Options key 12 104
- Brightness 12 105
- Improving copy quality 12 105
- Color saturation 12 106
- IMPORTANT 107
- Out of memory 108
- Direct printing IV 109
- Before using 110
- PictBridge 110
- Using PictBridge 13 110
- Printing images 13 111
- Printing images with 112
- Secure Function 112
- Lock 2.0 enabled 112
- (MFC-9320CW only) 112
- Connecting a camera 114
- Understanding the 114
- Printing data directly 116
- Chapter 14 120
- Software V 121
- How to read the HTML 122
- User’s Guide 122
- Appendixes VI 123
- Safety and legal A 124
- To use the machine safely A 125
- Safety and legal 127
- International ENERGY STAR 134
- Qualification Statement A 134
- Trademarks A 136
- Options B 137
- Memory board B 138
- Troubleshooting and routine 140
- Telephone line or connections 141
- Receiving Faxes 141
- Receiving Faxes (continued) 142
- Sending faxes 143
- Handling incoming calls 143
- Menu access difficulties 143
- Copy difficulties 144
- Printing difficulties 144
- Scanning difficulties 145
- Software difficulties 145
- Paper handling difficulties 145
- Print quality difficulties 146
- Network difficulties 146
- Improving the print quality C 149
- (3.7 in.) 151
- EFGHIJKLMN 155
- Setting Dial Tone detection C 156
- Telephone line interference C 156
- The toner cartridge 157
- (C)=Cyan 162
- Journal report C 163
- Routine maintenance C 170
- Cleaning the scanner C 171
- Cleaning the drum unit C 175
- Cleaning the paper pick-up 179
- Calibration C 180
- Auto Registration C 181
- Manual Registration C 181
- Replacing a Toner cartridge C 184
- Drum units C 189
- Replacing periodic 203
- Machine Information C 203
- Reset functions C 204
- Packing and shipping 205
- Menu and features D 210
- How to access the menu 211
- Menu table D 212
- Menu and features 213
- -9320CW) 223
- -9120CN) 230
- Entering text D 232
- Specifications E 234
- Specifications 235
- Print media E 236
- Interfaces E 241
- PictBridge (MFC-9320CW) E 242
- Computer requirements E 244
- Consumable items E 245
- Ethernet wired network E 246
- Authentication method E 250
- Encryption methods E 251
- Network key E 251
- Push Button Configuration 252
- Glossary F 253
- Glossary 255
- (Canada only) 263
Related products and manuals for Multifunction Devices Brother MFC-9120CN
(219 pages)© 2020, manymanuals.com. All rights reserved. | 0.214 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals