Brother HL 5370DW User Manual download pdf (Page 160)

Appendix

150

Quick reference for bar code control commands 0

The printer can print bar codes in the HP LaserJet emulation modes.

Print bar codes or expanded characters 0

Format: ESC i n ... n \

Creates bar codes or expanded characters according to the segment of parameters ‘n ... n’. For more

information about parameters, see the following Definition of Parameters. This command must end with the

‘ \ ’ code (5CH).

Definition of parameters 0

This bar code command can have the following parameters in the parameter segment (n ... n). As parameters

are effective within the single command syntax ESC i n ... n \, they do not apply in the bar code commands.

If certain parameters are not given, they take the preset settings. The last parameter must be the bar code

data start (‘b’ or ‘B’) or the expanded character data start (‘l’ or ‘L’). Other parameters can be given in any

sequence. Each parameter can start with a lower-case or upper-case character, for example, ‘t0’ or ‘T0’, ‘s3’

or ‘S3’ and so one.

Bar code mode 0

This parameter selects the bar code mode as shown above. When n is ‘t5’ or ‘T5’ the bar code mode (EAN

8, EAN 13, or UPC A) varies according to the number of characters in the data.

Code ESC i

Dec 27 105

Hex 1B 69

n = ‘t0’ or ‘T0’ CODE 39 (default)

n = ‘t1’ or ‘T1’ Interleaved 2 of 5

n = ‘t3’ or ‘T3’ FIM (US-Post Net)

n = ‘t4’ or ‘T4’ Post Net (US-Post Net)

n = ‘t5’ or ‘T5’ EAN 8, EAN 13, or UPC A

n = ‘t6’ or ‘T6’ UPC E

n = ‘t9’ or ‘T9’ Codabar

n = ‘t12’ or ‘T12’ Code 128 set A

n = ‘t13’ or ‘T13’ Code 128 set B

n = ‘t14’ or ‘T14’ Code 128 set C

n = ‘t130’ or ‘T130’ ISBN (EAN)

n = ‘t131’ or ‘T131’ ISBN (UPC-E)

n = ‘t132’ or ‘T132’ EAN 128 set A

n = ‘t133’ or ‘T133’ EAN 128 set B

n = ‘t134’ or ‘T134’ EAN 128 set C

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 171 172

No comments

Brother HL 5370DW User Manual Page 160