Brother BAS-342G Instruction Manual download pdf (Page 61)

9. SEWING

BAS-342G

9-2. Using the STOP switch

If you press the STOP switch (1) while sewing or test feeding is in progress, the CAUTION indicator (2) will illuminate and

the sewing machine will stop immediately.

1. Press the RESET key (3).

• The thread will be trimmed, and then the CAUTION

indicator (2) will switch off and the buzzer will stop

sounding.

2. If you do not wish to continue sewing, press the RESET

key (3) once more.

• The program number will flash. Carry out preparation

for the next sewing.

If you have pressed the STOP switch (1) at times such as if the thread breaks while sewing or the lower thread runs out, you

can resume sewing from the point where the thread ran out.

Press the RESET key.

• The thread will be trimmed, and then the CAUTION indicator will switch

off and the buzzer will stop sounding.

Press the

key to return the work clamp to the position where sewing is

to be continued.

• When the

key is pressed, the work clamp will move backward by one

stitch, and when the

key is pressed, the work clamp will move

forward by one stitch. (It will move quicker if you keep the key pressed

down.)

Depress the start switch (4).

• The sewing machine will start operating and sewing will start.

9-3. Using the thread wiper switch

The thread wiper switch (1) can be used to turn the thread

wiper (2) on and off.

4981Q

4982Q

4443Q

4022M

4023M

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 83 84

No comments

Brother BAS-342G Instruction Manual Page 61