Brother BAS-342G Instruction Manual download pdf (Page 28)

5. PREPARATION BEFORE SEWING

BAS-342G

5. PREPARATION BEFORE SEWING

5-1. Installing the needle

CAUTION

Turn off the power switch before installing the needle.

If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result.

1. Loosen the set screw (1).

2. Insert the needle (2) in a straight line as far as it will go,

making sure that the long groove on the needle is at the

front, and then securely tighten the set screw (1).

5-2. Operating the 2-pedal foot switch

When the work clamp switch (left side) is depressed, the

intermittent presser foot (1) and the work clamp (2) are

lowered, and when the start switch (right side) is then

depressed, the sewing machine starts operating.

The work clamp (2) lowering method can be changed

using memory switch No. 002. (Refer to "7-3. List of

memory switch settings.")

3990M

Work clamp switch

Start switch

3991M

3992M

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 83 84

No comments

Brother BAS-342G Instruction Manual Page 28