Brother BAS-342G Instruction Manual download pdf (Page 19)

4. INSTALLATION

BAS-342G

4-8. Installing the solenoid valve assembly

Install underneath the work table. (Refer

to "3. Table processing diagram" for the

installation positions.)

(1) Solenoid valve assembly

(2) Washers [2 pcs.]

(3) Wood screws [2 pcs.]

NOTE:

Make sure that the solenoid valve

assembly does not touch the control

box or the leg of the table.

4-9. Connecting the air tubes [4]

4-10. Installing the air hose [5]

1. Close the cock (1).

2. Turn the nut (3) at the end of the air hose (2) and connect it

to the valve (4).

3. Open the cock at the compressor.

* Check that no air is leaking from the connection of the

valve (4) and air hose (2).

4. Open the cock (1).

(The meter pointer will turn clockwise.)

NOTE:

Turn the cock (1) gently to open it.

5. Adjust the air pressure. (Refer to the next page.)

3972

3973

Branch unions Y

Plugs 4

Connect as shown in

the illustration while

checking the marks.

3974

Open

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 83 84

No comments

Brother BAS-342G Instruction Manual Page 19