Brother BAS-342G Instruction Manual download pdf (Page 20)

4. INSTALLATION

BAS-342G

4-11. Adjusting the air pressure [6]

Lift up the handle (2) of the regulator (1) and then turn it to

adjust the air pressure to 0.5 MPa.

After adjustment is complete, push the handle (2) downward to

lock it.

4-12. Adjusting the speed controller [7]

You can adjust the lifting and lowering speeds for the work

clamp using the knobs on the valves.

• When the upper knob is tightened, the lifting speed becomes

slower. When it is loosened, the lifting speed becomes faster.

• When the lower knob is tightened, the lowering speed

becomes slower. When it is loosened, the lowering speed

becomes faster.

Reference adjustments

Upper knob Fully tighten

Valve 1

Lower knob

Fully tighten and then loosen by

8 turns

Upper knob

Fully tighten and then loosen by

5 turns

Valve 2

Lower knob Fully tighten

You can operate the work clamp when the power is turned off

by pressing the manual buttons (1).

3975

Upper knob

Lower knob

Valve 1

3976

Valve 2

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 83 84

No comments

Brother BAS-342G Instruction Manual Page 20