Brother FAX-T104 Series User Manual download pdf (Page 79)

Remote Fax Options

8 - 4

Remote commands

Follow the commands below to access features when you are

away from the fax machine. When you call the fax machine and

enter your Remote Access Code (3 digits followed by ), the

system will give two short beeps and you must enter a remote

command.

Remote commands Operation details

95 Change the Fax

Forwarding

1 OFF You can select OFF after you have

registered or erase all the fax messages.

2 Fax Forwarding If you hear one long beep, the change has

been accepted. If you hear three short

beeps, you cannot change it because

something has not been set up (for

example, perhaps a fax forwarding had

not been registered). You can register

your Fax Forwarding number by entering

4 (see page 8-5). Once you have

registered the number, Fax Forwarding

will work.

4 Fax Forwarding number

6 Fax Storage

96 Retrieve a fax

1 Print a memory status list Enter the number of a remote fax machine

to print a memory status list.

2 Retrieve all faxes Enter the number of a remote fax machine

to receive stored fax messages.

(See page 8-5.)

3 Erase faxes from the

memory

If you hear one long beep, you can erase

fax messages from the memory.

97 Check the Receiving

Status

1 Document You can check whether the fax machine

has received any faxes. If yes, you will

hear one long beep. If no, you will hear

three short beeps.

98 Change the Receive

Mode

1 TAD:ANSWER MACH. If you hear one long beep, your change

has been accepted.

2 FAX/TEL

3 FAX ONLY

90 Exit Press 9 0 to exit Remote Retrieval. Wait

for the long beep, then replace the

handset.

1 ... 78 79 80 ... 120

Comments to this Manuals

No comments

Brother FAX-T104 Series User Manual Page 79

Comments to this Manuals

Related products and manuals for Faxes Brother FAX-T104 Series