Brother LH4-B800E Service Manual download pdf (Page 155)

LH4-B800E6 - 22

6. ELECTRIC MECHANISM

6-5. Description of DIP switches

6-5-1. Panel DIP switches

1. Slide the panel side cover to open it.

2. Change the DIP switch setting.

• Refer to the DIP switch table for an explana-

tion of the functions of each DIP switch.

3. Slide the panel side cover downward to close it.

NOTE:

Turn the power off before changing the DIP switch set-

tings.

If the settings are changed while the power is still on,

they will not take effect.

DIPSWA

Setting item

Presser foot remains lowered after sewing is complete (lifts when pedal is depressed)

Presser foot lifts after sewing is complete

Emergency stop using presser foot lifter switch enabled during automatic sewing

Emergency stop using presser foot lifter switch disabled during automatic sewing

Display setting during automatic mode = lower thread counter (Default: 100)

Display setting during automatic mode = production counter (Default: 0)

2-cycle sewing ON

(All programs will be set to 2-cycle sewing regardless of the setting for parameter

No. 55.)

2-cycle sewing OFF

Upper thread breakage detection disabled

Upper thread breakage detection enabled

Programs disabled

Programs enabled

OFF

Default

OFF

No.

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 167 168

No comments

Brother LH4-B800E Service Manual Page 155