LH4-B800E
3 - 16
3. ASSEMBLY
Tighten the screw @2 so that the distance between the needle bar @6 and the cutter @3 is 0.3 mm.
Tighten the screw @4 so that the top of the cutter blade and the top of the needle plate are aligned when the cutter @3
is pushed down manually to its lowest position.
For a flat cutter @8, tighten the screw @4 so that it is 1.5 to 2 mm from the top of the needle plate.
@2
@3
@6
0.3 mm
@4
@7
@8
Lowest position
Lowest position
Top of needle plate
1.5 - 2 mm
Top of needle plate
Comments to this Manuals