Brother DCP-J725DW User's Guide download pdf (Page 27)

Receiving a fax (MFC models only)

21

4

Retrieving fax messages 4

You can call your machine from any

touch-tone telephone and have your fax

messages sent to another machine. Before

you use this feature, you have to turn on Fax

Storage. (Fax Storage uu page 16)

a Dial your fax number.

b When your machine answers, enter

your remote access code (3 digits

followed by ) at once. If you hear one

long beep, you have messages.

c When you hear two short beeps,

press 962.

d Wait for a long beep, and then use the

dial pad to enter the number of the

remote fax machine where you want

your fax messages sent, followed by ##

(up to 20 digits).

Note

You cannot use l and # as dial numbers.

However, press # if you want to create a

pause.

e Hang up after you hear your machine

beep. Your machine will call the other

fax machine, which will then print your

fax messages.

Changing your Fax

Forwarding number 4

You can change the default setting of your fax

forwarding number from another touch-tone

telephone or fax machine.

a Dial your fax number.

b When your machine answers, enter

your remote access code (3 digits

followed by ) at once. If you hear one

long beep, you have messages.

c When you hear two short beeps,

press 954.

d Wait for the long beep, enter the new

number (up to 20 digits) of the remote

fax machine you want your fax

messages forwarded to using the dial

pad, then enter ##.

Note

You cannot use l and # as dial numbers.

However, press # if you want to create a

pause.

e Press 9 0 to stop Remote Access when

you have finished.

f Hang up after you hear your machine

beep.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 72 73

Comments to this Manuals

No comments