Brother MFC 9840CDW User Manual download pdf (Page 170)

Troubleshooting

160

Windows Vista™ users: 15

a Click the Start button, Control Panel, Network and Internet, Windows Firewall and click Change

settings.

b When the User Account Control screen appears, do the following.

 Users who have administrator rights: Click Continue.

 For users who do not have administrator rights: Enter the administrator password and click OK.

c Click the General tab. Make sure that Off (not recommended) is selected.

d Click OK.

Note

After the Brother software package is installed, enable again your Firewall.

 For Macintosh

Re-select your machine in the DeviceSelector application located in Mac OS X or Macintosh HD (Startup

Disk)/Library/Printers/Brother/Utilities or from the model pull-down list of ControlCenter3.

Network print software installation problems 15

The Brother print server is not found during the setup of the network print software or from the

installation of the printer driver of the Brother machine in Windows

The Brother print server is not found using the Simple Network Configuration capabilities of

Mac OS

X. 15

Make sure you have completed the IP address setting of the Brother print server according to Chapter 2 of

this User’s Guide before installing the network print software or printer driver.

 For a network with an Ethernet cable connection

Make sure you have completed the IP address setting of the Brother print server according to Chapter 2

of this User’s Guide before installing the network print software or printer driver.

 For a wireless network

Make sure you have completed the IP address setting and wireless network settings of the Brother print

server according to Chapter 3 of this User’s Guide before installing the network print software or printer

driver.

Check the following:

a Make sure that the machine is powered on, is on-line and ready to print.

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 203 204

No comments

Brother MFC 9840CDW User Manual Page 170