Brother MFC 9840CDW User Manual download pdf (Page 87)

LAN menu 6

Before using your Brother product in a network environment, you need to configure the correct TCP/IP

settings.

In this chapter, you will learn how to configure the network settings using the control panel, located on the

front of the machine.

The LAN menu selections of the control panel allow you to set up the Brother machine for your network

configuration. Press Menu, then press a or b to choose LAN. Proceed to the menu selection you wish to

configure. See Function table and default factory settings on page 181.

Please note that the machine is supplied with the BRAdmin Light utility and Remote Setup applications for

Windows

and Macintosh

, which also can be used to configure many aspects of the network. See Changing

the print server settings on page 17 for a wired connection or Changing the print server settings on page 30

for a wireless connection.

TCP/IP 6

If you connect the machine with the Ethernet cable to your network, use the Wired menu selections. If you

connect the machine to a wireless Ethernet network, use the WLAN menu selections.

This menu has ten sections: BOOT Method, IP Address, Subnet Mask, Gateway, Node Name,

WINS Config, WINS Server, DNS Server, APIPA and IPv6.

BOOT Method 6

This selection controls how the machine obtains an IP address. The default setting is Auto.

Note

• If you do not want your print server configured via DHCP, BOOTP or RARP, you must set the BOOT

Method to Static so that the print server has a static IP address. This will prevent the print server from

trying to obtain an IP address from any of these systems. To change the BOOT Method, use the machine’s

control panel, BRAdmin Professional utility, Remote Setup or Web Based Management (web browser).

• You cannot change the BOOT method using the BRAdmin Light utility that was supplied on the CD-ROM

with your Brother product. Please use the latest BRAdmin Professional utility that is available as a

download from http://solutions.brother.com

. This utility is only available for Windows

users.

a Press Menu.

b Press a or b to choose LAN.

Press OK.

c (For Wired) Press a or b to choose Wired.

(For Wireless) Press a or b to choose WLAN.

Press OK.

Control panel setup 6

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 203 204

No comments

Brother MFC 9840CDW User Manual Page 87