Brother BAS-342G Instruction Manual download pdf (Page 58)

8. USING CF CARDS

BAS-342G

8-3-1. Reading all sewing data from the CF card at once

Select the [r 1] data read/write mode.

Press the R/W key.

• [-SEd] will change to [ ALL].

* If you press the

or key to select the program

numbers that you would like to read and then continue

to carry out the following procedure, you can read the

selected sewing data in separate lots.

Press the R/W key.

• The buzzer will sound and all sewing data will be

loaded from the CF card and copied into the sewing

machine's internal memory.

• The program numbers that have been read will appear

in the menu display.

* If there is a large volume of data in the CF card, it will

take some time for all of it to be read. To halt the

reading of data, press the STOP switch. If you then

press the RESET key, the display will change back to

[ ALL].

End data read/write mode

TEST indicator switches off

Press the TEST key.

Turn off the power switch, remove the CF card, and then

close the cover of the CF slot.

4976Q

4576Q

4577Q

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 83 84

No comments

Brother BAS-342G Instruction Manual Page 58