Brother LH4-B800E Service Manual Page 164

  • Download
  • Add to my manuals
  • Print
  • Page
    / 168
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 163
LH4-B800E 6 - 31
6. ELECTRIC MECHANISM
Code Countermeasure
E-42
1. Clean the exhaust cooling fan. (Remove dust.)
2. Check if connectors P1 and P20 on the main circuit board are securely inserted and if any
harness is broken or short-circuited.
3. Turn power off, check if connectors CN2, CN3 and CN4 on the 1-step power supply circuit board
are securely inserted and if any harness is broken or short-circuited.
* OK if 17 V AC is present between pins 4 and 5 of connector P20 on the main circuit board.
If not OK, replace the transformer.
4. Replace the cooling fan.
5. Replace the main circuit board.
E-44
1. Check if connector P3 on the sub circuit board is securely inserted and if any harness is broken
or short-circuited.
2. Check if connector P3 on the 2-step power supply circuit board is securely inserted and if any
harness is broken or short-circuited.
3. Check if connectors P10 and P13 on the sub circuit board are securely inserted and if any
harness is broken or short-circuited.
4. Check if connectors P22 and P23 on the main circuit board are securely inserted and if any
harness is broken or short-circuited.
5. Replace the 2-step power supply circuit board.
6. Replace the sub circuit board.
7. Replace the main circuit board.
E-51
E-52
1. Turn off the power and initialize the settings.
E-54
1. Automatically resets after 2 minutes. (Sewing data of 3,000 stitches or less will be valid, and any
sewing data past the 3000th stitch will be invalid.)
E-55
1. Turn off the power and then back on again. (Zigzagging and bar tacking will automatically be
halved, so the error display will disappear.)
2. If error E-55 appears again after the above operation is carried out, turn off the power and
initialize the settings.
E-59
1. Turn off the power and initialize the settings.
2. If error E-59 appears again after the above operation is carried out, replace the man circuit
board.
Page view 163
1 2 ... 159 160 161 162 163 164 165 166 167 168

Comments to this Manuals

No comments