Brother MFC-7362N User's Guide download pdf (Page 28)

Chapter 2

18

Paper settings 2

Paper Type 2

Set up the machine for the type of paper you

are using. This will give you the best print

quality.

a Press Menu, 1, 2, 1.

b Press a or b to choose Thin, Plain,

Thick, Thicker, Recycled Paper or

Label.

Press OK.

c Press Stop/Exit.

Paper Size 2

(For Oceania)

You can use several different sizes of paper

for printing copies: A4, Letter, Executive, A5,

A5 L, A6, B5, or B6 and for printing faxes: A4,

Letter.

(For Asia)

You can use several different sizes of paper

for printing copies: A4, Letter, Legal,

Executive, A5, A5 L, A6, B5, B6 and Folio and

for printing faxes: A4, Letter, Legal or Folio

(215.9 mm x 330.2 mm).

When you change the size of paper in the

tray, you will also need to change the setting

for paper size at the same time so your

machine can fit the document or an incoming

fax on the page.

a Press Menu, 1, 2, 2.

b (For Oceania)

Press a or b to choose A4, Letter,

Executive, A5, A5 L, A6, B5, or B6.

(For Asia)

Press a or b to choose A4, Letter,

Legal, Executive, A5, A5 L, A6, B5,

B6 or Folio.

Press OK.

c Press Stop/Exit.

Acceptable paper and

other print media 2

Print quality may vary according to the type of

paper you are using.

You can use the following types of print

media: thin paper, plain paper, thick paper,

bond paper, recycled paper, labels or

envelopes.

For best results, follow the instructions below:

 DO NOT put different types of paper in the

paper tray at the same time because it

may cause paper jams or misfeeds.

 For correct printing, you must choose the

same paper size from your software

application as the paper in the tray.

 Avoid touching the printed surface of the

paper immediately after printing.

 Before you buy a lot of paper, test a small

quantity to make sure the paper is

suitable.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 169 170

Comments to this Manuals

No comments