Brother MFC-440CW User's Guide download pdf (Page 101)

Making copies

89

13

Copy settings 13

You can change the copy settings temporarily

for the next copy.

The machine returns to its default settings

after 60 seconds, or if the Mode Timer returns

the machine to Fax mode. (See Mode Timer

on page 24.)

If you have finished choosing settings, press

Mono Start or Colour Start.

If you want to choose more settings, press a

or b.

Note

You can save some of the settings that

you use most often by setting them as

default. These settings will stay until you

change them again. (See Setting your

changes as a new default on page 93.)

Changing copy speed and

quality 13

You can choose from a range of quality

setting. The factory setting is Normal.

 Fast

Fast copy speed and lowest amount of ink

used. Use to save time printing

documents to be proof-read, large

documents or many copies.

 Normal

Normal is the recommended mode for

ordinary print outs. This produces good

copy quality with good copy speed.

 Best

Use best mode to copy precise images

such as photographs. This provides the

highest resolution and slowest speed.

a Press (Copy).

b Load your document.

c Enter the number of copies you want.

d Press a or b to choose Quality.

Press OK.

e Press a or b to choose Fast, Normal

or Best.

Press OK.

f If you do not want to change additional

settings, press Mono Start or

Colour Start.

Enlarging or reducing the

image copied 13

You can choose an enlargement or reduction

ratio.

a Press (Copy).

b Load your document.

c Enter the number of copies you want.

d Press a or b to choose

Enlarge/Reduce.

Press OK.

e Do one of the following:

 Press a or b to choose the

enlargement or reduction ratio you

want. Press OK.

 Press a or b to choose

Custom(25-400%)and then enter

an enlargement or reduction ratio

from 25% to 400%. Press OK.

(For example, press 53 to enter

53%.)

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 200 201

Comments to this Manuals

No comments