Brother MFC 9840CDW User Manual Page 105

  • Download
  • Add to my manuals
  • Print
  • Page
    / 265
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 104
Printing photos from a digital camera
89
13
a Press Menu, 5, 3.
53.PictBridge
1.Paper Size
2.Orientation
3.Date & Time
Select ab or OK
b To set the PictBridge settings, press a or
b to choose 1.Paper Size,
2.Orientation, 3.Date & Time,
4.File Name, or 5.Print Quality.
Press OK.
c Press a or b to choose an option for
each menu setting.
Press OK.
d Press Stop/Exit.
Repeat b to c for each PictBridge
setting.
Note
Camera settings are prioritized as long as
your camera is not set to use your
machine’s settings (default settings). If
your camera is set to use your machine’s
settings, the machine will print your photo
using the settings below.
Please refer to the documentation
supplied with your camera for more
detailed information on changing
PictBridge settings.
Printing images 13
a Make sure that your camera is turned
off. Connect your camera to the USB
direct interface (1) on the front of the
machine using a suitable USB cable.
b Turn on the camera. Make sure your
camera is in PictBridge mode.
When the machine has recognized the
camera, the LCD shows the following
message depending on which mode the
machine is in:
01/09/2008 09:03
Fax Only
Camera Connected
aScan to FTP
Scan to E-mail
Scan to Image
bScan to OCR
Camera Connected
Contrast:-nnonn+
Quality :Auto
Enlg/Red:100%
Tray :MP>T1
Camera Connected
c Set your camera to print an image. Set
the number of copies if you are asked.
When the machine starts printing an
image, the LCD will shows the following
message:
PictBridge
Printing. Keep...
Machine settings Default settings
Paper Size Letter
Orientation Portrait
Date & Time Off
File Name Off
Print Quality Normal
1
Page view 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 264 265

Comments to this Manuals

No comments