Brother MFC 9840CDW User Manual download pdf (Page 36)

Chapter 2

20

Loading documents 2

You can send a fax, make copies, and scan

from the ADF (automatic document feeder)

and from the scanner glass.

Using the ADF (automatic

document feeder) 2

The ADF can hold up to 50 pages and feeds

each sheet individually. Use standard 20 lb

(80 g/m

2

) paper and always fan the pages

before putting them in the ADF.

CAUTION

DO NOT leave thick documents on the

scanner glass. If you do this, the ADF may

jam.

DO NOT use paper that is curled, wrinkled,

folded, ripped, stapled, paper-clipped,

pasted or taped.

DO NOT use cardboard, newspaper or

fabric.

 Make sure documents written with ink are

completely dry.

Single-sided document 2

Documents to be faxed must be from 5.8 to

8.5 inches (147.3 to 215.9 mm) wide and

from 5.8 to 14 inches (147.3 to 356 mm) long,

and of a standard weight [20 lb (80 g/m

2

)].

2-sided document 2

When you load a 2-sided document, the

document to be faxed must be from 5.8 to

8.5 inches (147.3 to 215.9 mm) wide and from

5.8 to 11.7 inches (147.3 to 297 mm) long,

and of a standard weight [20 lb (80 g/m

2

)].

a Unfold the ADF document output

support flap (1) and the ADF support

flap (2).

b Fan the pages well.

c Place your document, face up top edge

first, in the ADF until you feel it touch the

feed roller. The LCD will show

ADF Ready.

d Adjust the paper guides to fit the width of

your document.

CAUTION

To avoid damaging your machine while

using the ADF, DO NOT pull on the

document while it is feeding.

To scan non-standard documents see

Using the scanner glass on page 21.

1

2

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 264 265

Comments to this Manuals

No comments