Brother CW-600 User's Guide download pdf (Page 159)

Troubleshooting and Routine Maintenance

147

Print speed is too slow. Try changing the printer driver setting. The highest resolution needs longer data

processing, sending and printing time. Try the other quality settings in the printer

driver Advanced tab. Also, click Colour Settings, and make sure you uncheck

Colour Enhancement.

Turn the borderless feature off. Borderless printing is slower than normal printing.

(See Printing for Windows

or Printing and Faxing for Macintosh

in the Software

User’s Guide on the CD-ROM.)

Colour Enhancement is not

working correctly.

If the image data is not full colour in your application (such as 256 colour), Colour

Enhancement will not work. Use at least 24 bit colour data with the Colour

Enhancement feature.

Photo paper does not feed

properly.

When you print on Brother Photo paper, load one extra sheet of the same photo

paper in the paper tray. An extra sheet has been included in the paper package

for this purpose.

Clean the paper pick

-up roller. (See Cleaning the paper pick-up roller

on page 171.)

Machine feeds multiple pages. Make sure the paper is loaded correctly in the paper tray. (See Loading paper and

other print media on page 9.)

Check that more than two types of paper are not loaded in the paper tray at any

one time.

Printed pages are not stacked

neatly.

Make sure you are using the paper support flap. (See Loading paper and other

print media on page 9.)

Machine does not print from Adobe

Illustrator.

Try to reduce the print resolution. (See Printing for Windows

or Printing and

Faxing for Macintosh

in the Software User’s Guide on the CD-ROM.)

Printing Received Faxes

Difficulty Suggestions

Condensed print and white streaks

across the page or the top and

bottom of sentences are cut off.

You probably had a bad connection, with static or interference on the telephone

line. Ask the other party to send the fax again.

Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the

problem is with the sending machine. Try receiving from another fax machine.

Received colour fax prints only in

black and white.

Replace the colour ink cartridges that are empty or nearly empty, and then ask the

other person to send the colour fax again. (See Replacing the ink cartridges

on page 166.)

Check that Setup Receive is set to Colour(Max.A4). (See Setting Receiving

Priority on page 53.)

Left and Right margins are cut off or

a single page is printed on two

pages.

Turn on Auto Reduction. (See Printing a reduced incoming fax on page 52.)

Printing (continued)

Difficulty Suggestions

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 243 244

Comments to this Manuals

No comments

Brother CW-600 User's Guide Page 159

Comments to this Manuals

Related products and manuals for Scanner Transparancy Adapters Brother CW-600