Brother CW-600 User's Guide Page 168

  • Download
  • Add to my manuals
  • Print
  • Page
    / 244
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 167
156
No Paper Fed The machine is out of paper or
paper is not properly loaded in the
paper tray.
Do one of the following:
Refill the paper in the paper tray, and
then press Mono Start or
Colour Start.
Remove the paper and load it again
and then press Mono Start or
Colour Start.
The paper is jammed in the
machine.
Remove the jammed paper by following
the steps in Printer jam or paper jam
(MFC-5890CN only) on page 161 or
Printer jam or paper jam (MFC-6490CW
only) on page 163.
The jam clear cover
(MFC-5890CN) or the outer rear
cover or inner rear cover
(MFC-6490CW) may not be
closed properly.
(MFC-5890CN)
Open the jam clear cover and then close it.
Make sure the jam clear cover is closed
properly.
(MFC-6490CW)
Open the outer rear cover and inner rear
cover. Then close the inner rear cover and
outer rear cover. Make sure they are
closed properly.
No Response/Busy The number you dialled does not
answer or is busy.
Verify the number and try again.
Not Registered You tried to access a One Touch
or Speed Dial number that is not
programmed.
Set up the One Touch or Speed Dial
number. (See Storing Speed Dial numbers
on page 79.)
Out of Memory The machine's memory is full. Fax sending or copy operation in
progress
Do one of the following:
Press Stop/Exit and wait until the other
operations in progress finish and then
try again.
Clear the data in the memory. To gain
extra memory, you can turn off Memory
Receive. (See Memory Receive
(Monochrome only) on page 54.)
Print the faxes that are in the memory.
(See Printing a fax from the memory
on page 54.)
The memory card or USB flash
memory drive you are using does
not have enough free space to
scan the documents.
Delete unused files from your memory card
or USB Flash memory drive to make some
free space and then try again.
Error Message Cause Action
Page view 167
1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 243 244

Comments to this Manuals

No comments