Brother CW-600 User's Guide download pdf (Page 55)

Sending a Fax

43

5

Broadcasting

(Monochrome only)

5

Broadcasting is when the same fax message

is automatically sent to more than one fax

number. You can include Groups,

One Touch, Speed Dial numbers and up to

50 manually dialled numbers in the same

broadcast.

After the broadcast is finished, a Broadcast

Report will be printed.

a Press (Fax).

b Load your document.

c Press a or b to choose Broadcasting.

Press OK.

d You can add numbers to the broadcast

in the following ways:

 Press a or b to choose Add Number

and enter a number using a dial pad.

Press OK.

 Press a or b to choose Phone Book

and OK. Press a or b to choose

Alphabetical Order or

Numerical Order and OK. Press

a or b to select a number and OK.

Note

One Touch Dial locations begin with

l.

Speed Dial locations begin with

#.

e After you have entered all the fax

numbers by repeating step d, press

a or b to choose Complete.

Press OK.

f Press Mono Start.

Note

• If you did not use up any of the numbers

for Groups, you can ‘broadcast’ faxes to

as many as 216 (MFC-5890CN) or

256 (MFC-6490CW) different numbers.

• The available memory will vary depending

on the types of jobs in the memory and the

number of locations used for

broadcasting. If you broadcast to the

maximum numbers available, you will not

be able to use dual access and delayed

fax.

• If the memory is full, press Stop/Exit to

stop the job. If more than one page has

been scanned, press Mono Start to send

the portion that is in the memory.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 243 244

Comments to this Manuals

No comments