Brother CW-600 User's Guide Page 164

  • Download
  • Add to my manuals
  • Print
  • Page
    / 244
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 163
152
Dial Tone detection B
When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial
as soon as it detects a dial tone. This setting
can save a small amount of time when
sending a fax to many different numbers. If
you change the setting and start having
problems with dialling you should change
back to the factory No Detection setting.
a Press Menu.
b Press a or b to choose
Initial Setup.
Press OK.
c Press a or b to choose Dial Tone.
d Press d or c to choose Detection or
No Detection.
Press OK.
e Press Stop/Exit.
Telephone line interference B
If you are having problems sending or
receiving a fax due to possible interference
on the telephone line, you can change the
compatibility setting, which reduces the
modem speed to minimise errors.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c
Press
a
or
b
to choose
Miscellaneous
.
Press OK.
d
Press
a
or
b
to choose
Compatibility
.
e Press d or c to choose High, Normal or
Basic(for VoIP).
Basic(for VoIP) cuts the
modem speed to 9600 bps. Unless
interference is a recurring problem
on your telephone line, you may
prefer to use it only when needed.
Normal sets the modem speed at
14400 bps.
High increases the modem speed to
33600 bps. (factory setting)
Press OK.
f Press Stop/Exit.
Note
When you change the compatibility to
Basic(for VoIP), the ECM feature is
only available for colour fax sending.
Page view 163
1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 243 244

Comments to this Manuals

No comments