Brother BES-1260BC Service Manual download pdf (Page 119)

110

BES-960BC.1260BC

Chapter 6 Maintenance

1. Remove two connectors from the rear of the needle bar

case.

2. Loosen four screws q, and remove the head cover w,

and loosen two screws

e and remove the head cover

Rr.

Note:

Because the heads No.1 and No.2 have the head covers

R and L respectively, remove both the the covers when

greasing.

3. Loosen four bolts

t, and remove the needle case y.

4. Loosen three screws

u, and remove the presser foot

guide plate

5. Loosen two bolts o, and remove the cap eaves guide !0.

6. Loosen three bolts

!1, and remove the wiper solenoid

assembly

!2.

7. Remove the screws

!3 at the places indicated by the ar-

row, insert grease into the tapped hole using the syringe.

Then tighten the screws. Also grease the presser bar

spring

!4, the presser bar guide bracket !5, the presser

bar metal U !6 and D !7.

8. After greasing, assemble in the reverse order.

Note:

• When assembling the needle bar case

y, place it on the

machine and turn the change pulley !9 behind the cover

!8 at right. Check that it is engaged, and then tighten the

bolts.

• When attaching the presser foot guide plate

i, move the

presser foot up and down by the retracting lever to check

that is it not distorted.

BES-1260BC

1 ... 118 119 120 ... 198

No comments

Brother BES-1260BC Service Manual Page 119