7. FOLDING MACHINE
BAS-7610
7-12
4. Seam deviates to the left in parallel.
<Cause>
A. The pocket material is improperly folded because the center blade is attached to the right of the
correct position.
After loosening the eight bolts (1), shift the center blade to the left in the loose holes of the connecting blocks
(center blade), then fasten the bolts (1). At this time, the inner clamp assembly and the folding clamp assembly
might need to be shifted to the left simultaneously.
B. Program defect
Reprogram to shift the programmed pattern in parallel when the seam deviation is small.
Connecting block
Plate spring R 0.8
(1) Bolt 4X20
Plate spring L 0.8
Center blade assembl
1789S
Connecting pin
Center blade 3-corner J
Connecting pin
Connecting block
Bolt 5X25
Inner clamp 3-corner J
Inner clamp U 1
Folding plate supporter
Folding plate
supporter
Folding plate
supporter
Inner clam
U 2
Folding plate
supporter
Inner clamp U 3
Inner clam
U 3
Inner clamp assembly
1790S
Connecting block SR assembly
Bolt 5X25
Folding clamp 3-corner J
Connecting block SL assembly
Bolt 4X8
Adjusting screw
Settin
late
Tucking blade R-3J
Tucking blade L-3J
Tucking blade LD-3J
Tuckin
blade RD-3J
Chamfering blade RJ
Chamferin
blade LJ
1792S
Folding clamp assembly
Comments to this Manuals