7. FOLDING MACHINE
BAS-7610
7-26
15. The pocket opening is not tucked in.
<Cause>
A. The flap margin is small.
Make the flap margin at least 15 mm.
B. Tucking blade L and R are improperly attached.
Slide the tucking blades forward. If this adjustment is not enough to solve the trouble, enlarge the chamfered
parts of the tucking blades by machining. At this time, remove the burrs and buff the blades.
C. Because the chamfering blades are improperly positioned, the pocket material is pressed out
when the chamfering blades go to the pocket material.
Shift the chamfering blades or the whole chamfering mechanism backward. Check that the chamfering blades
go under the pocket material.
Connecting block SR assembly
Bolt 5X25
Folding clamp 3-corner J
Connecting block SL assembly
Bolt 4X8
Adjusting screw
Settin
late
Tucking blade R-3J
Tucking blade L-3J
Tucking blade LD-3J
Tucking blade RD-3J
Chamfering blade RJ
Chamferin
blade LJ
1792S
Folding clamp assembly
Comments to this Manuals