Brother Z-8550A Instruction Manual download pdf (Page 23)

Z-8550A, 8560A

4. INSTALLATION

4-5-2. Operating the treadle

1. When the treadle (3) is gently depressed to position (B),

low-speed sewing is carried out.

2. If it is then depressed as far as (C), high-speed sewing is

carried out.

3. When the treadle (3) is pressed forward and then back to

the neutral position (A), the needle will stop below the

needle plate (when needle down stop mode has been

set).

If the needle bar has been set to stop in the needle up

position, the needle will stop at a position above the

needle plate (needle up stop position).

4. When the treadle (3) is depressed all the way to position

(D) (or if the treadle (3) is depressed to position (D) and

then returned to the neutral position (A)), the mechanism

will sew half a stitch or one stitch, and then the needle

bar will stop at the needle up stop position.

(With the 8560A, the thread will be trimmed at this point.)

Furthermore, no needle zigzagging will be carried out at

this time.

2116M

2117M

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 95 96

No comments

Brother Z-8550A Instruction Manual Page 23