Brother Z-8550A Instruction Manual download pdf (Page 45)

Z-8550A, 8560A

6. USING THE OPERATION PANEL (B

SIC OPERATIONS)

6-2-8. Setting continuous backtacking (8560A and 8550A-A31 only)

You can carry out continuous backtacking for the set number of stitches at the sewing start after thread trimming has been

carried out (after the treadle has been depressed backward for the 8550A-A31).

NOTE:

This operation is possible after thread trimming has been carried out (after the treadle has been depressed

backward for the 8550A-A31).

When the treadle is depressed, continuous backtacking is carried out, and then the

sewing machine stops in the needle up position.

(For the 8560A, thread trimming is carried out automatically and then the sewing

machine stops in the needle up position.)

NOTE:



If the indicator of the thread trimming lock key is illuminated, the sewing machine will

stop in the needle up position without thread trimming being carried out (for the

8560A).



When the AUTO key is pressed so that the AUTO function is turned on, continuous backtacking is completed just

by depressing the treadle once, without keeping it depressed.

The status changes as follows each time the continuous stitch key is pressed.

No. of continuous backtack stitches

Off

Zigzag width/zigzag base line position

Illuminated

3440M

Example:

2159M

2147M

3441M

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 95 96

No comments

Brother Z-8550A Instruction Manual Page 45