Brother Z-8550A Instruction Manual download pdf (Page 47)

Z-8550A, 8560A

6. USING THE OPERATION PANEL (B

SIC OPERATIONS)

After the set number of stitches in E (fixed stitches) have been sewn, the needle bar stops

in the position that has been set by the needle up/down key (refer to p.40).

After this, rotate the material.

After the set number of stitches in F (fixed stitches) have been sewn, the needle bar stops

in the position that has been set by the needle up/down key (refer to p.40).

After this, rotate the material.

Repeat steps 2 and 3 above.

Thread trimming is carried out. (8560A)

The start backtack key and end backtack key can be pressed to turn on the backtack sewing function.

When the AUTO key is pressed to turn on the automatic sewing function, the fixed stitches in E and F are sewn

respectively simply by depressing the treadle once without needing to depress it continuously.

After the second number of F stitches is sewn, the sewing machine stops in the needle up position.

(For the 8560A, after the second number of F stitches is sewn, the thread is trimmed automatically and then the

sewing machine stops in the needle up position.)

After the fixed stitches in E and F are sewn, the presser foot is also lifted automatically.

From 1 to 250 stitches can be set for the E and F stitch numbers.

No. of fixed stitch/name label stitches

Off

Zigzag width/zigzag base line position

Illuminated

Example:

3445M

2159M

2160M

3406M 3407M

2147M

3446M

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 95 96

No comments

Brother Z-8550A Instruction Manual Page 47