Brother MFC-465CN User Manual download pdf (Page 84)

Chapter 9

68

Retrieving fax messages 9

You can call your machine from any touch

tone telephone and have your fax messages

sent to a machine. Before you use this

feature, you have to turn on Fax Storage.

a Dial your fax number.

b When your machine answers, enter

your remote access code (3 digits

followed by l) at once. If you hear one

long beep, you have messages.

c When you hear two short beeps, press

962.

d Wait for the long beep, enter the number

(up to 20 digits) of the remote fax

machine you want your fax messages

sent to using the dial pad, then enter # #.

Note

You cannot use l and # as dial numbers.

However, press # if you want to create a

pause.

e Hang up after you hear your machine

beep. Your machine will call the other

fax machine, which will then print your

fax messages.

Changing your Fax

Forwarding number 9

You can change the default setting of your fax

forwarding number from another touch tone

telephone or fax machine.

a Dial your fax number.

b When your machine answers, enter

your remote access code (3 digits

followed by l) at once. If you hear one

long beep, you have messages.

c When you hear two short beeps, press

954.

d Wait for the long beep, enter the new

number (up to 20 digits) of the remote

fax machine you want your fax

messages forwarded to using the dial

pad, then enter # #.

Note

You cannot use l and # as dial numbers.

However, press # if you want to create a

pause.

e Press 9 0 to reset the machine when you

have finished.

f Hang up after you hear your machine

beep.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 191 192

Comments to this Manuals

No comments