7. FOLDING MACHINE
BAS-7610
7-37
26. The seam margin is large. (Heavy material)
<Cause>
When the material is relatively thick, the shape of the sewn pocket is large
Refer to “Trouble 6.”. If the adjustment in “Trouble 6.” is not enough to solve this trouble, the center blade needs
to be replaced by a smaller one. The standard center blade is 1.4 mm smaller on both sides than an actual
pocket shape. When several sizes of center blades (for example, the 1.8 mm smaller one on both sides or the
2.2 mm smaller one on both sides) are available besides the standard one, almost all heavy material can be
managed.
Connecting pin
Connecting block
Plate spring R 0.8
Center blade 3-corner J
Bolt 4X20
Plate spring L 0.8
Center blade assembly
1789S
Comments to this Manuals