Brother MFC7150C User Manual download pdf (Page 36)

MFC SETUP AND CONNECTIONS

Triplex Adapter

Two Line Phone

External Two Line TAD Fax Machine

You can keep two-line telephones on other wall outlets as always. There are

two ways to add a two-line telephone to the MFC’s wall outlet. You can plug

the telephone line cord from the two-line telephone into the L1+L2 jack of the

triplex adapter. Or, you can plug the two-line telephone into the TEL jack of

the two-line TAD.

Multi-Line Connections (PBX)

Most offices use a central telephone system. While it is often relatively

simple to connect the machine to a key system or a PBX (Private Branch

Exchange), we suggest that you contact the company that installed your

telephone system and ask them to connect the MFC for you. It is advisable to

have a separate line for the MFC. You can then leave the MFC in FAX mode

to receive faxes any time of day or night.

If the MFC is to be connected to a multi-line system, ask your installer to

connect the unit to the last line on the system. This prevents the unit from

being activated each time a telephone call is received.

As with all fax units, this machine must be connected to a two wire system. If

your line has more than two wires, proper connection of the MFC cannot be

made.

If you are installing the MFC to work with a PBX:

It is not guaranteed that the unit will operate correctly under all

circumstances with a PBX. Any cases of difficulty should be reported

first to the company that handles your PBX.

If all incoming calls will be answered by a switchboard operator, it is

recommended that the Answer Mode be set to MANUAL. All incoming

calls should initially be regarded as telephone calls.

The unit may be used with either pulse or tone dialing telephone service.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 274 275

No comments

Brother MFC7150C User Manual Page 36