2-72
Confidential
3.5.3 No paper fed manual feed slot (Error code 9A)
Not detect paper at feeding from manual feed slot
3.5.4 Double feeding
User Check
• Load the paper into the manual feed slot.
Step Cause Remedy
1
Harness connection failure of
registration front/rear sensor PCB
ASSY
Check the harness connection of the
registration front/rear sensor PCB ASSY,
and reconnect it.
2
Low voltage power supply PCB
ASSY failure
Replace the low voltage power supply PCB
ASSY.
3 Main PCB failure Replace the main PCB ASSY.
4
Registration front/rear sensor
failure
Check the sensor performance following
the procedure in "Operational check of
sensors" (Chapter 5).
If any problem occurs, replace the regist
frame ASSY.
User Check
• Check if the paper is loaded into the paper tray correctly.
• Check if the thickness of the paper is 60 to 105 g/m
2
.
• Clean the separation pad.
• Check that too much paper is not loaded in each tray.
Step Cause Remedy
1 Paper feeding roller failure Replace the paper feeding kit.
Comments to this Manuals