Brother DCP-7057 Service Manual Page 95

  • Download
  • Add to my manuals
  • Print
  • Page
    / 337
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 94
2-58
Confidential
Error code A8
Scanning color parameter error for recording the image.
Error code A9
These errors do not usually occur in the normal use. The conceivable causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
Error, which cannot be specified, occurs.
Error code AA, AB
Error, which cannot be specified, occurs.
Error code AC
Error, which cannot be specified, occurs.
Error code AD
Timeout error during waiting for completion of scanning DMA transfer.
Scan Unable A8
See Troubleshooting and routine maintenance chapter in User's Guide.
Step Cause Remedy
1
White level data failure Execute the "Acquisition of white level data
(Function code 55)".
2 Document scanner unit failure Replace the document scanner unit.
3 Main PCB failure Replace the main PCB ASSY.
Scan Unable A9
---
Scan Unable AC
Remove the original document. Turn the power off, then on again.
<User Check>
Turn OFF the power switch, and turn it ON again after a while.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Scan Unable AD
Remove the original document. Turn the power off, then on again.
Step Cause Remedy
1 Document scanner unit failure Replace the document scanner unit.
2 Main PCB failure Replace the main PCB ASSY.
Page view 94
1 ... 94 95 96 ... 337

Comments to this Manuals

No comments